Lemo 2 sold out

Lemo 2 Atomizer
The Lemo 2 is the advance version of the well-known Lemo series atomizers due to its new innovative design of a side e-liquid fill hole and the use of PEEK(the well-known high heat and corrosion resistance material) of insulating piece. Vaping becomes safer and more stable, and no more needs of detaching the atomizer during refilling. The fill process becomes easier and leakage can be avoided. The inheritance of RBA head also maximizes the fun of DIY experience and could bring cloud vapor production for you.

Parameter:
Length: 76.2mm
Diameter: 22mm
Liquid Capacity: 3.8ml
Rated Resistance Range: ≥0.3Ω

(Default configurations: )
Resistance of the Pre-made Coil: 0.5Ω
Diameter of the coil: 0.5mm

Standard configuration

1 x Lemo 2 Mouthpiece 1 x Lemo 2 Coil Stand 4 x Seals Gasket (big)
1 x Lemo 2 Top Cap 1 x Lemo 2 Atomizer Base 2 x Seals Gasket (mid)
1 x Lemo 2 Glass Tube 1 x Pre-made Heating Coil 5 x Silicone (black)
1 x Lemo 2 Atomizer Cover 1 x Heating Coil (1m) 2 x Organic Cotton
1 x Lemo 2 Atomizer Tube 4 x Small Screws 1 x Screw Driver
​

2.PEEK Used as Insulating Material: PEEK(poly ether ether ketone)——a kind of special polymer material which is famous for the high heat and corrosion resistance. We use PEEK as the material of insulating piece inside RBA head so as to provide a safer and more stable vapor for customers.


3.Adjustable Airflow: The air-inlet hole on Lemo 2 is enlarged compare to the previous version. In this case, huger vapor could be enjoyed while the device will not be too hot. One can easily rotate the regulation cover to adjust the airflow, the more the slot is covered, the less the airflow is.


4.Organic Cotton Wick: Pure organic cotton is used as the wick of RBA head, people could enjoy a more pure flavor when vaping.


5.Larger Diameter of Mouthpiece: Cloud vapor production is easily produced by Lemo 2 and the extended size of mouthpiece could make the inhale more comfortable.

Liquid Refilling:
1. Rotate the side e-liquid fill hole cover counter-clockwise to expose the fill hole and then slowly refill the e-liquid into glass tube.
2. After the liquid is filled, rotate the side e-liquid fill hole cover clockwise to close the fill hole.

Tips: Parallelize the atomizer and then refill it. In this case, more liquid could be injected into the tank.

Note:
1.Air-inlet hole should be closed during refilling process.
2.Make sure the e-liquid level is between 10%-90% and leave a small air pocket in order to avoid leakage.
3.Do not put the syringe needle directly into liquid in the tank during refilling, or it may lead to leakage.


Price 1100THB.
EMS 60THB.

 

Very good price again K'Big

 

Got mine today.
It's super airy and great for direct lung hits, even with the air flow at it's tightest setting....

loving the huge diameter drip tip in my mouth

 

I don't know, but from what I have heard so fare people like it. I bought the Lemo from Big last month and was actually thinking of getting one more, but this is subohm, but I guess I can use an 1.0+ Ohm coil as well ?

 

Believe or not, this is the first time that I have sub-ohm'd, and I'm really impressed.
I'm vaping at 20 watts using the 0.5ohm coil that was in the Lemo 2 and it tastes surprisingly lovely with the Deadly Sin.

 

Let's see what the big fella thinks of it:

 

I am trying to find comparison with the Goblin airflow. Anyone can help ?

 

It looks similar to the Delta II which is nowhere near the Goblin in terms of airflow.
I actually find the Delta quite restrictive in comparison.

 

I tried the Delta 2 and found it too restrictive as well for my taste.

Many thanks for the info Rick, that's exactly what I wanted to knoa

 

Mine seems more airy than my Goblin, all in all the Lemo2 is a very nice RTA.
Put it like this-it's no less airy than the Goblin-it's possible my Goblin is not wicked the best it could be, since mine gurgles away. The Lemo2 is fine.
I should say, though,that the Delta 11 and the Lemo2 are currently my favourite tanks.

 

Thanks @haybilly , I might have to have a look at the shop then, you got me curious !

 

I just got my Lemo2 and am still using the stock coil, which was pre-wicked,and it's really nice.

 

And. ........I am generally very careful with my RTAs and mods,but just now, while refilling the Lemo 2-it jumped out of my hand and fell on the floor (luckily it was the floorboards)and. ......It seems fine. It seems like a sturdy little beast .

 

Incidentally, refilling is such a breeze with the top fill system.