Origen Dripper Clone Sold out

Origen Dripper Clone

Body stainless steel
Airflow channel 1 channel 2 and 3
Dia: 22mm. H: 25mm.


Price 599 baht (with O-rings, rope, wire).
+ EMS 50 Baht






- Line id: bigby-pass

- PM me here at Thai E Vape:
Thai E Vape Forum

- E Mail me at: cfbigcom90@gmail.com

Make Payment at:
K-Bank
Account number: 0262308679
Name: Chawalit Fuengwidthayakarn

 

picked this one up from him over the weekend. its a beast, but you need a mod that can put out the amps.

 

just single coiled this bad boy at 1.3 ohms and it is hitting like a champ. great flavor, nice cloud, excellent little dripper!

- - - Updated - - -

p.s. single coil using 28g kanthal

 

wow....

 

+1 from me.

Received this this afternoon. Set up dual twisted 30 AG to about 0.4 ohms. Air-flow fully open. Insta-fogged the room. Ridiculous clouds.

Its solid & well made. Only gripe is the threads on the 510 were not great and wouldn't go on my ohms checker or itaste vv. Bit of sanding and all good.

The AFC works well. The cap is appropriately (i.e. not over-)snug. It looks absolutely stunning on an ss nemesis. I have run down a 30A AW in about 45 minutes haha.

This is my new favorite dripper.

 

Migfht have to get one of these when I get back in 6 weeks. I like this airflow looks like it may be much airier than the one I got from Micky. I love that one so this could be interesting.

 

Fully open it is very airy

And the price is excellent

 

Just for fun, I copied Panga with twisted 30 AWG, dual 5/4 microcoils, .41 ohms. All 6 air holes open, drilled out to 2mm. Vaping Monkey's Gorilla Glaze 6mg 30PG/70VG, a free sample they sent me. Very good, clean flavor. Completely dry cotton after 3 hits, and that's with the juice wells totally full.

[video=youtube_share;UnSIWId0XM0]http://youtu.be/UnSIWId0XM0[/video]

 

37 watts at 9.5A if anybody was wondering.

 

Gonna have to give that build a ttrial I think.

 

ryanmacl

Having looked around web a bit I think your positioning of the coils is a better way than mine (horizontal above the well). Will try that next rebuild

Having googled a little bit it seems people consider this am original atty not a 'clone' as it is different enough from the Origen. Guy on ukv posted comparison here A lot of them saying its better, but some saying don't crazy sub-ohm as the insulator is exposed and might melt. TBH I don't think that its that exposed but I am still pretty noobish.

 

They're actually at a 45, so the cotton is easier to pull. I go up from the well, then over the top and back down. Keeps the juice coming from both directions. I could probably center it horizontally above the screw and run each wick into both drip wells, but this way its easier for the wire to go into position at the screw.

Yeah, it is going that way. When they first came out everyone was screaming clone, but personally I like the slot better than the circular hole.

 

[video]Movie on 20-03-14 at 11.57 PM[/video]

Didn't have any 30 gauge so used a single 28g parallel coil 5/6 wrap on a 2mm screwdriver. 0.5 ohm on the nose. On my roigen clone of course.

Flash not working on the camera atm so I can post photo's tomorrow if wanted

- - - Updated - - -

Bloody clip didn't load. Have to work that out. Sorry

- - - Updated - - -

Photo instead.

 

its not nearly as fancy as pommy's quad coil, or as much vapor as ryan's dual coil, but here is how i set up a single coil on the origen clone. i cut the cotton a bit short on the one side this time around to experiment between more and less cotton.




- - - Updated - - -

keep in mind, i am running off an inadequate devise