Billow V2

Well, I picked up the V1,when I saw it on ECCC based on a very favorable review by 'VapingVic' but, he failed to mention the leaking issue. The vape from the V1 is indeed awesome, and on a par with V2,but the V2 does not leak-unlike V1. After literally seeing 2 or 3 complete tankfulls drip onto the table, I think I may have found a way to cure the problem, but it's early days-it may decide to leak again in a day or so.
The V2 is great, I haven't managed to get my usual 0.6 ohm set up in it yet, they seem to come out at 0.3 and need 45 plus watts, but it's definitely one of the best tanks around. V1 is good but needs fussy wicking.

Sent from my SM-G900F using Tapatalk

 

Mine just came in today, I'll get it built out when my kid gets put down for the night. ☺

Sent from my MT2L03 using Tapatalk

 

I guess that this should be in the 'Hand Check' but, here goes


Sent from my SM-G900F using Tapatalk
I know it's tempting fate,but I think I've cued the famous Billow 1 leak issue.

 

Got mine built out finally. Had some leaking issues out the bottom of the tank at first, where the tank section screwed into the base. Turned out that the o-ring on the base was stretched out, ended up replacing it. Vapes great now, dual coil 0.4 ohm build @ 40 watts.



Sent from my MT2L03 using Tapatalk

 

Yes, both the Billow 2 and now the Billow 1 are tanks that I can put down and not vape for a couple of days and there's no leakage- result!

Sent from my SM-G900F using Tapatalk