1. Welcome to Thailand Vapers, an English language forum for members in Thailand and the rest of Asia to talk about vaping.
    Commonly referred to as e-cigarettes, vaping is really about the use of personal vaporizers (mods) and atomizers (tanks, clearos, RBAs, RDAs, RTAs) filled with e-liquid.
    Are you looking to get started or an old hand at vaping? Everyone is welcome here so sign up today and talk vaping with us!

Drippers !!!!

Discussion in 'Rebuildable Atomisers' started by -V-, Nov 6, 2014.

  1. Scratchy
    Lurking

    Scratchy Well-Known Member

    Joined:
    Jul 8, 2014
    Messages:
    2,501
    Likes Received:
    2,873
    Good mentioning RR! Origen is very nice indeed and I love mine (clone) but it's biased toward vertical coil setups so for that reason did not bring up. That was a mistake as V could easilly work with them. Flavor it produces is excellent and very well regarded in the vape community. Amongst all the RDAs I have used, its' top 3 or 4 flavor-wise. Sometimes though I wish it had just a little bit more open draw....at least as an option for occasional use.
     
  2. RobRaven

    RobRaven Well-Known Member

    Joined:
    Sep 9, 2014
    Messages:
    104
    Likes Received:
    48
    Location:
    Sweden
    Well i dont find Vertical coils are harder to make! :)
     
  3. Scratchy
    Lurking

    Scratchy Well-Known Member

    Joined:
    Jul 8, 2014
    Messages:
    2,501
    Likes Received:
    2,873
    I don't either...like I mentioned, I shouldn't have not included it for that reason. My bad.
     
  4. RobRaven

    RobRaven Well-Known Member

    Joined:
    Sep 9, 2014
    Messages:
    104
    Likes Received:
    48
    Location:
    Sweden
    Well i got a Tobh clone on its way from FT.Hope its as easy! :)
     
  5. Scratchy
    Lurking

    Scratchy Well-Known Member

    Joined:
    Jul 8, 2014
    Messages:
    2,501
    Likes Received:
    2,873
    Please do share with us your experience using it! :)
     
  6. Rider

    Rider Well-Known Member

    Joined:
    Sep 26, 2014
    Messages:
    255
    Likes Received:
    54
    TOBH is great, simple and good cloud...after comparing/testing it with the Plume all day yesterday, i think i prefer it over the Plume....can fit lots of juice too, about half a Kayfun nano tank if the cotton is done right. Its so simple but works very well. I fidget too much with the Plume and it can get annoying.
     
    Last edited: Nov 7, 2014
  7. Tibo
    Relaxed

    Tibo French Hedonist

    Joined:
    Jun 18, 2014
    Messages:
    3,593
    Likes Received:
    4,228
    Location:
    Bangkok
    I only own a few dippers :

    - Magma : It was the first one I bought because I though I did not want to bother dripping every 3 minutes so the Magma offered a good capacity well at that time. It took me ages to find a build I like on it and since the airflow was the same as the Orchid V1, I barely use it. The Orchid performed better with my build and it has a tank. Now I have a 1.1 ohms parallel micro coil and the airflow ring is removed. It is ok, average vapor but nice flavor. Now the fact that I have to unscrew the top cap to drip makes that I don't use it.

    - Mutation X : This thing i madness, it's a cloud chaser RDA and oh boy does it vapes. I use a 0.5ohms dual coil on it, flavor is very good with tight airflow. With open wide airflow, cloud chasing boys, cloud chasing. Easy to build and easy to drip, I love it.

    - Stillare: I bought this one without having done any research, never heard of it either. I set up the Wide Chiff Nuff (something like that) on it and build a .2ohms with 26ga. Well I have to say, it's on par with the Mutation X. I find the flavor a bit more muted that on the Mutation but vaporize, same thing. It's a cloud chasing RDA. Easy build and great look, love it.

    - Tobh Atty :Just got this one yesterday. It's a clone and the manufacturing is average, not like the quality of the MX or the Stillare. The way the airflow is positioned makes that the coils cannot be centered and it does not make sense. The build is then harder to achieve and the wicking is not even on each side.
    I haven't tape so much with it but good flavor, good vapor. Unfortunately there isn't many option in the airflow and even wide open, it's like a half closed Stillare/Mutation X. It is a good Atty I think, but I was expecting bigger airflow. Note, it should be very easy to drill the holes to make it like the Stillare, a horizontal shaped hole.
     
    Kranks likes this.
  8. Rider

    Rider Well-Known Member

    Joined:
    Sep 26, 2014
    Messages:
    255
    Likes Received:
    54
    After lots of experimenting i came up with this for the TOBH:

    You can make both ends of the wick the same size, but have to be creative in getting it to fit. I press it into the small space, then over the negative terminal, then in the space between the negative and positive terminals. I find it works much better this way. I make the cotton 'really' tight through the coil and have tried many different levels of tightness. Dont taper the tails, cut the ends off that you had to twist to get it to fit through the coil.
     
    Tibo likes this.
  9. Rick O-Shea

    Rick O-Shea iStick Fanboy

    Joined:
    Aug 31, 2014
    Messages:
    6,838
    Likes Received:
    6,555
    I used to loop the wick over through the gap in the posts and rest it on the other wick. Now I don't even bother, never get a dry hit, I might if I chain vaped but I just take long hits.
    [​IMG]

    40 Drops 0.25r
    [​IMG]

    Ill get a good 20 or more hits from that, I like to chuck my mod on the sofa, table or in my pocket without concern for leakage.
     
    Tibo likes this.
  10. Tibo
    Relaxed

    Tibo French Hedonist

    Joined:
    Jun 18, 2014
    Messages:
    3,593
    Likes Received:
    4,228
    Location:
    Bangkok
    I build it with 24ga kanthal, since I need 8 wraps on each coils, it just take too much room :/

    Sent from the future
     
  11. Rick O-Shea

    Rick O-Shea iStick Fanboy

    Joined:
    Aug 31, 2014
    Messages:
    6,838
    Likes Received:
    6,555
    Mine's 24g too
     
  12. Tibo
    Relaxed

    Tibo French Hedonist

    Joined:
    Jun 18, 2014
    Messages:
    3,593
    Likes Received:
    4,228
    Location:
    Bangkok
    Yeah and my build is similar to yours. And I don't really like how short is that wick tail :(

    Sent from the future
     
  13. Rick O-Shea

    Rick O-Shea iStick Fanboy

    Joined:
    Aug 31, 2014
    Messages:
    6,838
    Likes Received:
    6,555
    I don't mind how short it is if it vapes OK.

    You get dry hits?
     
  14. Tibo
    Relaxed

    Tibo French Hedonist

    Joined:
    Jun 18, 2014
    Messages:
    3,593
    Likes Received:
    4,228
    Location:
    Bangkok
    Not really, some on the fully fresh battery but if the wick is dripped correctly

    Sent from the future
     
  15. -V-
    Cool

    -V- Thread Starter Administrator Staff Member

    Joined:
    Jan 28, 2012
    Messages:
    11,335
    Likes Received:
    5,440
    Could you link up some of these dripper which you think are good, getting a bit lost with all the names...
     

Share This Page