Youde Zephyrus 'RTA'

3mm diameter gets the coils very close to the chamber, resulting in getting the atty super hot So far the 2.5mm is working the best for me.

 

Is that because you are making Dual coils, Tibo--surely a single coil 3mm dia would fit OK??

 

Yes but it is a dual coil deck. Building it in single coil option won't give you more space. Unless you managed to put the coil above the poles but I doubt there is any more room up there anyway.

 

They are talking about rebuilding the coil heads...

 

Yes, Tibo, we were stripping out the stock heads.

Sent from my SM-G900F using Tapatalk

 

Add placing a single coil over the hole, it can be centred depending on the holes used through the ceramic base.

**Updated**

We need pics, ill vape mine dry and get some.

 

A couple of photos would be awesome--only really interested in how you centre the coil--I can see the larger single hole and the double smaller holes--obviously pos/neg legs go into one of each, and a bit of tweaking should bring the coil central , I guess.
Then, how much wick material to use--a good amount, I guess--bit like when doing the SubTank heads, or the AnyVape Fury Tank head.

 

OK so its not quite centred, but you get the idea.

 

Got it--once you've dropped one leg down the larger hole, the way you've built your coil will determine which of the 2 smaller holes is easiest to drop the other leg down--neat, thanks for the photo.

 

A fresh one.



At this stage, check for air flow, too much cotton and it will be tight.

 

That's a Beaut.

 

Thrown in with no care at all and they work great.

**Updated**

 

Well, it's quite a tricky little number getting the leg to go down the smaller of the 2 holes, I had to help it by sticking a needle down first, but due to the tight fit there isn't much room to square it up, so if it's not central there's not much can be done- here's my first attempt, but I hope they improve.

 

7 wraps seems quite a lot, or high ohms. But it all comes down to the vape.

 

Yes, my mistake, I was going for possibly around 0.9 or more and this one comes out at 0.6- it will not get much use before I try again now I see roughly what's what. Thanks again.